***Features:
*3R Repeater
*Support Jumbo Frame
*Transparent Transport and very low delay
*Support ITUT prescribed DWDM/CWDM wavelength
*Support DMI function for SFP+/XFP fiber module
*Support PRBS31 Pattern Generator and Checker function
*Support Loopback test function
*Economic In-band Management function
*Powerful Network Management function(Web, SNMP, Console)
*Support hot plugging
*Support 2U Rack (16 channel) and standalone use
*Full State LED display
*Easy installation
FiberRoad provides 10G Optical-Electrical-Optical Converter(3R) and module cards to apply in the solution of FTTX, CWDM/DWDM, with the speed of 10G.
Two-port 10G pluggable media converter, supporting a variety of XFP and SFP+ modules allowing network designers to utilize the module to meet their network requirements. Compatible 10G XFP or SFP+ modules including support for the following standards; 10GBase-SR, 10GBase-LR, 10GBase-ER, 10GBase-LRM, and 10GBase-ZR.
FR-OEO-10G-3R, its Module Card support network management(Web, SNMP, Console) by management card of FR600-R16 2U Rack (16 channel) chassis, allowing users to view system statues, counters, and network statistics. Moreover, it also can be remote managed by management card of 2U Rack when standalone use.
With various Interface:
SFP+ to SFP+
SFP+ to XFP
XFP to XFP
****Application:
*Connection between fiber to fiber 10Gbps Ethernet equipment function as fiber mode converter, or as fiber repeater for long distance transmission.
*Media converter for network backbone(SAN, LAN, MAN).
*Can be applied in Telecommunication room, R&D laboratory, Data center, and etc.
*1310nm /1550nm/CWDM/DWDM Optical Wavelength Conversion.
*Providing protections against lighting and static electricity for Ethernet network and the network main system
*Providing additional network management options
*Can be applied in Telecommunication room, R&D laboratory, Data center, etc.
Specification:
| Performance Data |
Technical Indexes |
| Equipment function |
3R Repeater |
| Transmission Speed |
10Gb/s （ 9.95Gb/s-11.35Gb/s ） |
| Protocols |
IEEE802.3ae (10Gbase-SR/LR/ER/ZR/LRM) |
| Access Type |
10G LAN/ 10G WAN |
| Interface Type |
A Type: SFP+ To/From SFP+
B Type: SFP+ To/From XFP
C Type: XFP To/From XFP
|
| Transmission Distance |
SFP+ module: Up to 80Km
XFP module: Up to 80Km
|
|
Maximum Packet
Forwarding Rate
|
14,880,950/S |
|
Network management
information:
|
• Card type information
• SFP+ or XFP fiber module detection
• SFP+ or XFP fiber module DMI function （ Temperature 、 Voltage 、 Optical power ）
• Link status detector
• Enable/Disabled Loopback test function
• Enable/Disable PRBS Generator and checker function
• Rate select （ 10Gbase-Lan or Wan ）
• Remote card's status monitor （ only in pairs ）
|
| power requirement |
Rack-mountable : AC 85 ～ 220V OR DC -48V
Standalone: AC 220V OR DC -48V
Power consumption: ≤6W
|
| Work Environment |
Operating Temp: 0~ 50 ℃
Storage Temp: -10~ 70 ℃
Humidity: 5%~90% （ non-condensing ）
|
| Dimension |
Card ： 115mm （ W ） × 78mm （ D ）
Standalone ： 156mm （ W ） × 128mm （ D ） × 32mm （ H ）
|
